Atom 3.5/3.5DX

    Please follow the steps below before opening the box and setting the 3D printer to start printing.
    1. Take the 3D printer out of the package and place it on a stable surface, and use it in a well-ventilated place near an AC outlet. ＊It is not recommended to use extension cords and direct air-conditioning to place the printer
    2. Take out the magnetic rod and the calibration platform. To ensure the magnetic performance of the magnetic rod, please avoid separating the two. ＊The magnet of each magnetic rod is marked as N-level; if not marked as S-level
    Note: If the mobile platform is connected together, please reconnect the two corresponding to the magnetic (as shown in the figure)

    Can't solve the problem?

    

    If you still can’t solve your problem, please write to us and attach a photo or video, and someone will contact you. To
    contact us